Opals
Gemstones
Jewelry
Coins
You have not bid on this auction.
$29.00
Current Bid
1
Bids
Closed
15/08/2024 04:25 pm
1
2324
7
72.60 CTS FAIRY OPAL ROUGH [F8797]
1
2324
7
- SKU
- Dimensions (mm)
- 58.500 x 26.300 x 6.700mm
- Weight (cts)
- 72.600
- Colours
-
FAIRY OPAL ROUGH
It is precious opal embedded in the natural sandstone and mined in Queensland Australia.Only by carbonizing it does it become like black opal..The treatment is usually oil and or sugar with no acid being used.This is a parcel that has been treated to show the fire so you can make as specimens or re shape and or cut into smaller stones.If so you will have to re treat.
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes.I have tried this with varying success.
- You can heat the stones in a oven to 100 degress F [38C] for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 for 4 hours-you can check earlier. This is best done on a out door bbq,kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 600 degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
It is similar in appearance to Honduran opal.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia.Only by carbonizing it does it become like black opal..The treatment is usually oil and or sugar with no acid being used.This is a parcel that has been treated to show the fire so you can make as specimens or re shape and or cut into smaller stones.If so you will have to re treat.
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes.I have tried this with varying success.
- You can heat the stones in a oven to 100 degress F [38C] for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 for 4 hours-you can check earlier. This is best done on a out door bbq,kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 600 degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
We have taken the photo with the stone wet.
The weight and size is appIt is similar in appearance to Honduran opal.
- SKU
- Dimensions (mm)
- 58.500 x 26.300 x 6.700 mm
- Weight (cts)
- 72.600
- Colours
-
FAIRY OPAL ROUGH
It is precious opal embedded in the natural sandstone and mined in Queensland Australia.Only by carbonizing it does it become like black opal..The treatment is usually oil and or sugar with no acid being used.This is a parcel that has been treated to show the fire so you can make as specimens or re shape and or cut into smaller stones.If so you will have to re treat.
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes.I have tried this with varying success.
- You can heat the stones in a oven to 100 degress F [38C] for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 for 4 hours-you can check earlier. This is best done on a out door bbq,kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 600 degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
It is similar in appearance to Honduran opal.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia.Only by carbonizing it does it become like black opal..The treatment is usually oil and or sugar with no acid being used.This is a parcel that has been treated to show the fire so you can make as specimens or re shape and or cut into smaller stones.If so you will have to re treat.
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes.I have tried this with varying success.
- You can heat the stones in a oven to 100 degress F [38C] for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 for 4 hours-you can check earlier. This is best done on a out door bbq,kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 600 degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
We have taken the photo with the stone wet.
The weight and size is appIt is similar in appearance to Honduran opal.
| Shipping provider | Shipping to Australia | Shipping to rest of world |
|---|---|---|
| FedEx | $12.00 / 3 days | $39.00 / 10 days |
|
Australia
FedEx is discounted to $12.00 on orders with 2 or more items
Rest of the world
FedEx is discounted to $39.00 on orders with 2 or more items
|
||
| Registered Shipping | $9.00 / 7 days | $16.00 / 21 days |
|
Australia
Registered Shipping is discounted to $9.00 on orders with 2 or more items
Rest of the world
Registered Shipping is discounted to $16.00 on orders with 2 or more items
|
||
mineralgemworld
Mineral Gem World store, has now moved to the SEDA GEMS store making your chekout seamless
Surfers Paradise, Australia
Verified
14846 Feedback
-
PositiveExactly as pictured. Quickly and securely shipped.
-
Positive
Beautiful stone
![71.67 CTS MONTANA AGATE -USA-POLISHED [MGW2860]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/320000-324999/320510/320510_1354686982.jpg?width=480&aspect_ratio=1001%3A1000)
-
Positive
Thank you so much just what I wanted
![3.56 CTS SAPPHIRE CRYSTALS SIR LANKA [MX3357]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/425000-429999/426302/5399126dae445.JPG?width=480&aspect_ratio=1001%3A1000)
-
Positive
Thank you so much I love it
![3.48 CTS SAPPHIRE CRYSTALS SIR LANKA [MGW4348]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/430000-434999/431904/53bb6a8843a1e.JPG?width=480&aspect_ratio=1001%3A1000)
-
Positive
Excellent stones. No inclusions or cracks. Loupe clear. Will cut into a beautiful gem. Great seller.
![PINK AMETHYST [ROSE DE FRANCE] ROUGH 40.20 CTS [F1135]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/130000-134999/133147/133147_1254213354.jpg?width=480&aspect_ratio=1001%3A1000)
-
Positive
Exactly as pictured. Quickly and securely shipped.
Bids History (1)
pmcphail
Purchased from this seller previously
3 months ago
$28.00
Why are users outbidding themselves?
When a bid is placed, this is the maximum amount a user is willing to bid for the product. Our system will then automatically bid on that users behalf, incrementally increasing the bid to maintain their position as the highest bidder, up to the specified maximum.
When there is an icon indicating 'Auto Bid,' it means our system is actively placing bids for the user based on their maximum bid. This may appear as if users are outbidding themselves, but it's simply a result of the system updating the bid to reflect the users maximum limit.
Audit
The Gemstone Sheriff program allows our members to request an audit on any product, which is completed by an independent Gemologist who assesses the accuracy of the item description and pictures.
Shipping Details
Shipping:
$16.00 21 days via Registered Shipping
Ships from:
Australia
Payment Options
This seller adds 10.00% tax to transactions in Australia.
Overview
Listing Type :
Standard
Product ID :
1203930
Estimated RRP :
$100.00
Starting Bid : $28
Starts : 1st August 2024 04:49 pm PDT
Ends : 15th August 2024 04:25 pm PDT
* All prices are in USD
![240.00 CTS BOULDER IRONSTONE PENDANT PARCEL [MX8300A3]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/430000-434999/430524/53b25666d9f81.JPG?width=480&aspect_ratio=1001%3A1000)
![160.00 CTS BOULDER IRONSTONE PENDANT PARCEL [MX8300A10]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/430000-434999/430538/53b25b463eb3a.JPG?width=480&aspect_ratio=1001%3A1000)
![IRONSTONE PICTURE STONE WITH SILICA 84.95 CTS [F 2075]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/185000-189999/187047/187047_1276242787.jpg?width=480&aspect_ratio=1001%3A1000)
![BOULDER IRONSTONE EMBEDDED WITH OPAL 140 CTS [MGW1661]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/55000-59999/58295/58295_1225632579.jpg?width=480&aspect_ratio=1001%3A1000)