Opals
Gemstones
Jewelry
Coins
あなたはこのオークションに入札していません。
$29.00
現在の入札額
1
入札
閉まっている
15/08/2024 04:25 pm
1
2308
7
72.60 CTS FAIRY OPAL ROUGH [F8797]
1
2308
7
- SKU
- 寸法(mm)
- 58.500 x 26.300 x 6.700mm
- 重さ (CT)
- 72.600
- 色
-
FAIRY OPAL ROUGH
It is precious opal embedded in the natural sandstone and mined in Queensland Australia.Only by carbonizing it does it become like black opal..The treatment is usually oil and or sugar with no acid being used.This is a parcel that has been treated to show the fire so you can make as specimens or re shape and or cut into smaller stones.If so you will have to re treat.
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes.I have tried this with varying success.
- You can heat the stones in a oven to 100 degress F [38C] for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 for 4 hours-you can check earlier. This is best done on a out door bbq,kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 600 degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
It is similar in appearance to Honduran opal.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia.Only by carbonizing it does it become like black opal..The treatment is usually oil and or sugar with no acid being used.This is a parcel that has been treated to show the fire so you can make as specimens or re shape and or cut into smaller stones.If so you will have to re treat.
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes.I have tried this with varying success.
- You can heat the stones in a oven to 100 degress F [38C] for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 for 4 hours-you can check earlier. This is best done on a out door bbq,kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 600 degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
We have taken the photo with the stone wet.
The weight and size is appIt is similar in appearance to Honduran opal.
- SKU
- 寸法(mm)
- 58.500 x 26.300 x 6.700 mm
- 重さ (CT)
- 72.600
- 色
-
FAIRY OPAL ROUGH
It is precious opal embedded in the natural sandstone and mined in Queensland Australia.Only by carbonizing it does it become like black opal..The treatment is usually oil and or sugar with no acid being used.This is a parcel that has been treated to show the fire so you can make as specimens or re shape and or cut into smaller stones.If so you will have to re treat.
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes.I have tried this with varying success.
- You can heat the stones in a oven to 100 degress F [38C] for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 for 4 hours-you can check earlier. This is best done on a out door bbq,kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 600 degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
It is similar in appearance to Honduran opal.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia.Only by carbonizing it does it become like black opal..The treatment is usually oil and or sugar with no acid being used.This is a parcel that has been treated to show the fire so you can make as specimens or re shape and or cut into smaller stones.If so you will have to re treat.
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes.I have tried this with varying success.
- You can heat the stones in a oven to 100 degress F [38C] for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 for 4 hours-you can check earlier. This is best done on a out door bbq,kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 600 degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
We have taken the photo with the stone wet.
The weight and size is appIt is similar in appearance to Honduran opal.
| 配送業者 | 発送先:国 | その他の国への配送 |
|---|---|---|
| FedEx | $12.00 / :日日 | $39.00 / :日日 |
|
：国
:数量以上のアイテムを含む注文では、:プロバイダーは $12.00 に割引されます
世界のその他の地域
:数量以上のアイテムを含む注文では、:プロバイダーは $39.00 に割引されます
|
||
| Registered Shipping | $9.00 / :日日 | $16.00 / :日日 |
|
：国
:数量以上のアイテムを含む注文では、:プロバイダーは $9.00 に割引されます
世界のその他の地域
:数量以上のアイテムを含む注文では、:プロバイダーは $16.00 に割引されます
|
||
-
ポジティブExactly as pictured. Quickly and securely shipped.
-
ポジティブ
Beautiful stone
![71.67 CTS MONTANA AGATE -USA-POLISHED [MGW2860]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/320000-324999/320510/320510_1354686982.jpg?width=480&aspect_ratio=1001%3A1000)
-
ポジティブ
Thank you so much just what I wanted
![3.56 CTS SAPPHIRE CRYSTALS SIR LANKA [MX3357]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/425000-429999/426302/5399126dae445.JPG?width=480&aspect_ratio=1001%3A1000)
-
ポジティブ
Thank you so much I love it
![3.48 CTS SAPPHIRE CRYSTALS SIR LANKA [MGW4348]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/430000-434999/431904/53bb6a8843a1e.JPG?width=480&aspect_ratio=1001%3A1000)
-
ポジティブ
Excellent stones. No inclusions or cracks. Loupe clear. Will cut into a beautiful gem. Great seller.
![PINK AMETHYST [ROSE DE FRANCE] ROUGH 40.20 CTS [F1135]](https://liveplatforms-production.b-cdn.net/tenants/gr/uploads/images/130000-134999/133147/133147_1254213354.jpg?width=480&aspect_ratio=1001%3A1000)
-
ポジティブ
Exactly as pictured. Quickly and securely shipped.
入札履歴 (1)
pmcphail
以前にこの販売者から購入した
2ヶ月前
$28.00
なぜユーザーは自分自身を上回る入札をするのでしょうか?
入札する場合、これはユーザーが製品に入札する意思のある最大金額です。その後、当社のシステムがそのユーザーに代わって自動的に入札し、最高入札者としての地位を維持するために、指定された最大値まで入札額を段階的に引き上げます。
「自動入札」を示すアイコンがある場合、システムが最高入札額に基づいてユーザーに積極的に入札していることを意味します。これは、ユーザーが自分自身を上回って入札しているように見えるかもしれませんが、ユーザーの上限を反映するためにシステムが入札を更新した結果にすぎません。
監査
Gemstone Sheriffプログラムを使用すると、当社のメンバーはあらゆる製品の監査をリクエストできます。この監査は、商品の説明と写真の正確さを評価する独立した:資格認定者によって完了されます。
発送詳細
配送:
$16.00 Registered Shipping 経由の日数をカウント
発送元:
Australia
支払いオプション
この出品者は、Australia での取引に 10.00% 税金を追加します。
概要
リストタイプ :
Standard
製品番号 :
1203930
推定希望小売価格 :
$100.00
入札の開始 : $28
始まります : 1st August 2024 04:49 pm PDT
終わり : 15th August 2024 04:25 pm PDT
* すべての価格は:通貨で表示されます
